Dimensions

• Height (60” propeller): 7' 4" or 6’ 11” (lowers down to clear a 7’ garage door header)
• Height (68” propeller): 8’ or 7’ 10” (lowers down to clear an 8’garage door header)
• Length: 14’ 8”
• Width: 72"
• Weight: 575 lbs. (standard kit)

Components - Standard Super Sky Cycle

• Custom twin Exhaust & mufflers.
• The Engine is a Rotax 912ULS 100 HP 4 stroke aircraft engine.
• (Powerfin) 4 blade 60” or 68” Propeller (your choice). *The 68” propeller is recommended for pilots over 200 lb, if auxiliary fuel tanks are installed, or for high altitude flight.
• Inst: ASI, ALT, Engine RPM, Water Temp, 2 EGT, CHT, oil pressure, oil temperature, & Hobbs.
• The seat tank holds 7.5 gallons of fuel.
• The Metro Launch System.
• MLS Rotor Brake.
• The G-Force Magnum Landing Gear.
• The Airfoil Step.
• 27 hp MZ34 two stroke drive engine (Allows the rear wheels to pull you down the road as a three-wheeled motorcycle).
• The Folding Rotor System.
• The Super Slider Rotor Head (eliminates stick shake).
• Rotor Tachometer.
• Headlight.
• Chopper Style Handlebars.
• Front & Rear Disk Brakes.
• The Super Sky Cycle Kevlar Tail with Cadillac Style Bullet Tail Light & License Plate Holder.
• Mirrors.
• DOT Rated Tires.

Performance Features

• The Super Sky Cycle is centerline thrust.
• The Super Sky Cycle has a huge horizontal stabilizer on a long moment arm.

Materials

• The airframe raw materials kit has pre drilled locator holes that will have to be re drilled to size and extra length tubes that will have to be cut to length.
• The Motorcycle (driving part) parts are intended to be built and licensed as a homebuilt three-wheeled “Trike”.
• The Gyroplane (flying part) parts kit is intended for the experimental category where you as the builder fabricate at least 51% of the kit for recreation and education and licensed it as an Experimental Homebuilt Aircraft.
• The cheek plates and various other parts are cut to shape and have undersized locator holes.
• The front landing gear, landing gear support, and rotor head washer are made from 4130 Chrome Molly steel and they are heat treated. No coatings are included in the materials kit.
• The tail is made using Kevlar.· We strive to keep the integrity of the true Amateur Built aircraft kit.

Options:

Optional Engines

• Rotax turbocharged 115 hp engine

Future add on components for The Super Sky Cycle

• Fully enclosed body

*Find out more about this concept at: www.newhorizonscomponentsllc.com

NOTE: We are only selling complete raw materials kits, not parts. Each part was designed exclusively for the Super Sky Cycle. Use of The Super Sky Cycle’s parts on any other vehicle is strongly discouraged.

NOTE: The undersized locator holes are pre-drilled for easy location and assembly. The Super Sky Cycle can easily be assembled using common tools: Vise, drill press, belt sander, cutoff saw, SAE tools, small lathe, etc.

WARNING: The Super Sky Cycle may be as dangerous as any other aircraft. It could cause injury or death. Build or fly one at your own risk.

Now your Fly-Drive dreams can come true. Purchase a New Super Sky Cycle kit today and fulfill your dream of owning a vehicle that both Flies & Drives.